Grbl Controller comments

Automatically send GCode codes to the CNC machines
User

Your vote:

J
John Attwell
Hello, I am having difficulty in downloading GRBL 3.6.1 very time I click on Download I get this message. "Software Informer has blocked this file as it may be harmful:" I cut and paste the URL as suggested but the process just loops.
Please advise how I can overcome this issue.

Oct 19, 2023 Was it helpful?  yes(26) no(5) | Reply
J
John Attwell
Good day to you,
I am trying to download GRBL 3.6.1 but I'm getting a virus alert that is stopping the download. I have this version loaded on two other computers.

Oct 18, 2023 Was it helpful?  yes(5) no(0) | Reply
P
rating Paul Thompson
It would be handy if you could adjust the speed and number of passes when framing. My old Vigotec laser could do this, I recycle and use scrap materials and sometimes space is limited. If you could keep passing round the work area non-stop it would be easier to set the materials where you want it to cut/engrave.
Only had this new laser a week, just getting the hang of GRBL, as Vigotec do their own software, but other than that very pleased.
Regards
Paul

Oct 15, 2023 Was it helpful?  yes(0) no(0) | Reply
L
rating Lindsay
The program is simple to use and has an excellent vizualizer.

Mar 19, 2023 Was it helpful?  yes(0) no(0) | Reply
F
Franta
Hi, please give me some advice. Is it possible to write more than one GCODE command in the "command line"? What delimiter can be used. Thank you very much for the answer. Franta.

Feb 19, 2023 Was it helpful?  yes(0) no(0) | Reply
M
Mathew
I'm having some trouble opening the program with Arduino, it keeps saying that it can't find data from COM port.

Dec 21, 2022 Was it helpful?  yes(0) no(0) | Reply
I
Israel Afolayan
I want to sincerely thank you for this app. I tried to use this app, it says "undefined field rate" is not set. Please, I need your assistance on how to go about it.

Nov 1, 2022 Was it helpful?  yes(0) no(2) | Reply
M
rating MariusNeil
ThankĀ“s for GRBL. GRBL is wonderful.

Sep 3, 2022 Was it helpful?  yes(0) no(0) | Reply
M
rating Mark
Beware! I downloaded this software and it did nothing! Then when I tried to delete it, Microsoft said the software did not allow some parts to be installed. So is that code for "Ha! Now you have Chinese spyware on your machine" I guess it does. Moral... no such thing as free!

Was it helpful?  yes(21) no(15) | Reply
T
tom
Mark, very strange only you have this problem

Nov 14, 2022 Was it helpful?  yes(3) no(0) | Reply
K
rating keithmv
Finallly after 2 days of searching I have found it and managed to download it, Sorry I am a silve3r surfer and somettimes thongs don't gwet digested properly. Now to run it so I can use my cnc machine and how it works

Was it helpful?  yes(5) no(3) | Reply
F
rating FLAVIO FONSECA
Thanks guys. I appreciate your job.

Was it helpful?  yes(2) no(5) | Reply
S
rating Sinan
I cannot move the Z axis during operation. How do I do that?

Was it helpful?  yes(6) no(6) | Reply
D
rating Denny
It's a very nice software.

Was it helpful?  yes(1) no(1) | Reply
B
rating baraz
It's a very nice software.

Was it helpful?  yes(3) no(3) | Reply
G
rating Gintas
It's a very nice software.

Was it helpful?  yes(1) no(1) | Reply

Alternative downloads

HP Support Assistant
Free
rating

Maintain the performance of your computer.

SourceRabbit GCode Sender
Free
rating

A CNC control software for every GRBL-compatible CNC machine.

Pololu Simple Motor Controller
Free
rating

It allows the full control of your hardware Pololu controller device.